Feature:
Liquid silicone rubber single slide table vertical injection molding machine JTT-550D LSR
Clamping Force: 55T
Max shot volume: 176cm3
Fixed low die and movable up die to avoid insert part shift
oil hydraulic unit under low die to ejector finshed products
ejector speed and stroke adjusted by actual demand
Special for liquid silicone material injection
Match with dosing system
support mold vaccum signal, support blow and ejector mold;
support needle valve signal on mold
offer mold heating gate
Specfication:
Model | JTT-550 D | ||
injection system | Screw Diameter | mm | 30 35 40 |
Injection Pressure | kg/cm2 | 2170 1594 1220 | |
Theoretical Shot Volume | cm3 | 99 135 176 | |
Injection Rate | cm3/sec | 51 69 90 | |
Screw Stroke | mm | 140 | |
Screw Speed | rpm | 0-175 | |
Nozzle Contact Force | tons | 2.6 | |
Nozzle Stroke | mm | 200 | |
Number of Temperature Control | - | 3 | |
Hopper Capacity | L | 30 | |
clamping system | Clamping Force | tons | 55 |
Opening Force | tons | 13.5 | |
Platen Size | mm | 650x490 | |
Distance Between Tie Bar | mm | 500x340 | |
Min Mold Height | mm | 260/200 | |
Opening Stroke | mm | 200 | |
Max Open Daylight | mm | 460/400 | |
Ejector Force | tons | 1.3/2.1 | |
Ejector Stroke | mm | 45/145 | |
sliding system | Slide Stroke | mm | 500 |
Max Mold Weight | kg | 150 | |
Station Clearance | mm | ±0.02 | |
oil pressure system | Max Hydraulic Pressure | kg/cm2 | 140 |
Pump Output | L/min | 47 | |
Oil Reservior Capacity | L | 150 | |
Cooling Water Consumption | /hr | 800-1000 | |
Pump Moter Power | KW | 7.5 | |
Barrel Heating Power | kw | 4.5 | |
Total Power | kw | 12 | |
other | Machine Weight | tons | 2.4 |
Machine Dimension | mm | 2.5*1.2*2.7 | |
Shipping Weight | tons | 2.6 | |
Shipping Measurement | mm | 2.6*1.3*2.8 | |
