Feature:
Thermosetting BMC/DMC vertical injection molding machine JTKR-1600D BMC
Clamping force: 160T
Max shot volume: 332cm3
Vertical clamping, horizontal injection
pressure cylinder to help BMC into barrel
Match mold temperature controller to heat barrel
Apply for electric equipment products, kitchen products which have high request for fireproof
Single slide table make conveninet for worker operation
Specfication:
UNIT | JTKR-1600D | ||
INJECTION SYSTEM | screw diameter | mm | 42 |
injection pressure | kg/cm2 | 3810 | |
theoretical shot volume | cm3 | 332 | |
shot weight | g | 302 | |
injection rate | cm3/sec | 83 | |
screw stroke | mm | 240 | |
screw speed | rpm | 0-142 | |
nozzle contact force | tons | 6.7 | |
nozzle stroke | mm | 250 | |
temprature control number | - | 5 | |
hopper capacity | L | 90 | |
CLAMPING SYSTEM | clamping force | tons | 165 |
opening force | tons | 29 | |
platen size | mm | 760*480 | |
distance between tie bar | mm | 1280*330 | |
min mould height | mm | 250 | |
opening stroke | mm | 350 | |
max open daylight | mm | 600 | |
ejector force | tons | 2.9 | |
ejector stroke | mm | 45/95 | |
SLIDE SYSTEM | slide stroke | mm | 420/1170 |
max mold weight | kg | 2-4 | |
station clearance | mm | 450*2/300*3 | |
OIL PRESSURE SYSTEM | max hydraulic pressure | kg/cm2 | ±0.02 |
pump output | L/min | 175 | |
oil reservoir capacity | L | 109-17 | |
cooling water consumption | /hr | 550 | |
pump motor power | KW | 1400-1600 | |
heating power | kw | 18.3 | |
total power | kw | 14.3 | |
OTHER | machine weight | tons | 32.6 |
machine dimension | m | 10.4 | |
4.3*3.1*3.1 | |||
shipping weight | tons | 9.8 | |
shipping measurement | m | 4.7*3.3*2.4 |
