The type and specification of the die casting machine are selected according to the material, comprehensive limit, uniform wall thickness and net weight of the cold chamber casting. The practical process parameters such as the value of the locking (mold) force, the amount of each pouring, the filling degree of the injection chamber, etc. can be calculated as the basis for selecting the model. Various parameters of the cold chamber die casting machine can be easily input and displayed on the display screen, and can be stored in multiple ways for easy future use. It can reduce the formation of bubbles in the casting, reduce the batching of the casting, reduce the loss of the mold, reduce the impact vibration of the aluminum die casting equipment, and significantly improve the quality of aluminum die casting products.

What are the characteristics of column type cold chamber die casting machine?

(1) Suitable for aluminum die casting of various aluminum alloys such as zinc, aluminum, magnesium, and copper;

(2) The usage in production sites is relatively small, and most of them are small servers;

(3) The injection chamber is placed vertically. After the molten metal is poured into the injection chamber, the gas is above the molten metal, and less gas is entrained during the injection process;

(4) The injection pressure goes through many turning points, which affects the pressure transmission, especially in the increase stage, because the nozzle inlet nozzle orifice is small and the pressure transmission is insufficient;

(5) Convenient for setting up the central glue inlet;

(6) The length and width of the equipment occupy a small area, but the height-to-width ratio of the equipment is relatively high;

(7) When the lower punch enters the metal liquid, fault detection is inconvenient;

(8) In the actual production operation, there are procedures for cutting off the leftover cakes and listing the cakes to improve cost efficiency;

(9) When using automated operation, improve the process of removing the leftover cake from the top of the lower punch.