Feature:
Low work table vertical injection molding machine JTTR-850D
Single slide table
Clamping force: 85T
Max shot volume: 373cm3
Low work table is friendly for workers
Vertical clamping, vertical injection
D—single slide table(one up die and one low die)
Single slide table offer operation convenience
Optional saving energy motor
Fixed low die and movable up die to avoid insert part shift; oil hydraulic unit under low die to ejector finshed products;
ejector speed and stroke adjusted by actual demand
Combined with conveyor system used on production line
Specfication:
Model | JTTR-850D | ||
injection system | Screw Diameter | mm | 35 40 45 50 |
Injection Pressure | kg/cm2 | 2171 1663 1314 1064 | |
Theoretical Shot Volume | cm3 | 183 238 302 373 | |
Max Shot Weight | g | 82 107 135 167 | |
Injection Rate | cm3/sec | 190 | |
Screw Stroke | mm | 140 | |
Screw Speed | rpm | 0-200 | |
Nozzle Contact Force | tons | 2.9 | |
Nozzle Stroke | mm | 220 | |
Number of Temperature Control | - | 4 | |
Hopper Capacity | L | 30 | |
clamping system | Clamping Force | tons | 85 |
Opening Force | tons | 10.5 | |
Platen Size | mm | 740x500 | |
Distance Between Tie Bar | mm | 560x320 | |
Min Mold Height | mm | 250 | |
Opening Stroke | mm | 250 | |
Max Open Daylight | mm | 500 | |
Ejector Force | tons | 3.3 | |
Ejector Stroke | mm | 75/145 | |
sliding system | Slide Stroke | mm | 500 |
Max Mold Weight | kg | 200 | |
Station Clearance | mm | ±0.02 | |
oil pressure system | Max Hydraulic Pressure | kg/cm2 | 140 |
Pump Output | L/min | 76 | |
Oil Reservior Capacity | L | 180 | |
Cooling Water Consumption | /hr | 1200-1500 | |
Pump Moter Power | KW | 11 | |
Barrel Heating Power | kw | 5.6 | |
Total Power | kw | 16.6 | |
other | Machine Weight | tons | 4.8 |
Machine Dimension | m | 2.4*1.30*2.8 | |
Shipping Weight | tons | 5 | |
Shipping Measurement | m | 2.5*1.40*2.95 |
